If you go away for an extended period, Zip recommends you turn off your G3 HydroTap to save water and energy.

Relates to: Zip HydroTap G3

If you go away for an extended period, Zip recommends you turn off your G3 HydroTap to save water and energy. If you have a Sparkling G3 HydroTap please use instructions here

To Turn OFF
Step 1: Turn the water off at the supply.

Step 2: Depress the levers on the HydroTap three or four times until the water stops. This will empty the tanks.

Step 3: Turn off power supply at the power point.

 

To Turn ON 

Step 1: Turn on water supply at supply point. Turn on power supply at power point. Note: any programmed times will be retained via the battery backup and will not need to be re-set.

Step 2: Go to the command centre, scroll through the menu with [MENU Λ or MENU V] keys on left of screen and navigate to [Filter Flush]

Step 3: Open the filter flush stop-valve and ensure the end of the hose is in a bucket or the sink. 



Step 4: Press [Adjust Λ] to the right of the screen, this will start the flow of water and [Filter Flush – ON] will be displayed. Flush for 30 seconds to remove any water sitting in the filter cartridge. 



Step 5:
Once the filter flush completed, turn filter flush [OFF] by pressing [Adjust V], then turn Stop Value to OFF by rotating the lever anti-clockwise until it is at 90 degrees to the filter flush hose. Put the hose back into the filter compartment.



Step 6: Press[MENU Λ or MENU V] to exit the Filter Flush screen. Your unit will return to normal operation after approximately 10 seconds.

Questions not answered?

Call Our Helpdesk

0345 6 005 005

Schedule a Visit