How to use the levers and safety button on your Zip HydroTap
A unique safety lock eliminates the risk of accidental discharge of boiling water.
Press the red lever and cover the “safety” button at the same time for access to boiling water.
To deactivate the safety button, hold the chilled lever and cover the safety button for 10 seconds until the safety button turns off, it is now disabled and you can have boiling water access by simply depressing the red lever. For boiling only units see instructions here.
Repeat the process to reactivate the safety button as required.
Flick the red lever towards you and boiling water will run for any pre set period of 5-15 seconds. To find out how to adjust this setting, click here.
Chilled or Ambient water
Press the blue lever to dispense either chilled or Ambient filtered water, depending on which model of HydroTap you are using.
Flick the blue lever towards you and a set limit of 700ml of chilled or ambient water will run which is especially useful for filling water bottles or carafes. To find out how to adjust this setting, click here.
Questions not answered?
Call Our Helpdesk